How To Drive A Manual Car in Lahore A Tutorial For Beginners and Advance & What is Manual Transmission | Best Driving School in Lahore
Asslam-o-Alikum! you can learn in this article How To Learn Driving A Manual Car in Lahore This Tutorial is For Beginners and Experts and you can also learn here about What is Manual Transmission by Best Driving School in Lahore.
About 65-70% of the vehicles in the world have manual transmission but the ratio in Lahore is even higher. Today we will talk about manual transmission by Best Driving School in Lahore.
Gear Lever
This is a manual gear lever (image Fig.1)
In some countries, it is also called a gear stick. We also engage and disengage the gear through the clutch.
Pedals
There are three types of pedals inside the manual vehicle. You can also remember it in such a way that A,B and C Where A means accelerator B means brake and C means clutch. (image Fig.2)
We will use the legs in such a way that you use only the clutch with your left foot, you will not use up brakes and accelerators with your Left foot and you will use your right foot for brakes and accelerator.
Gear Knob
The number of gears inside the car is on the gear knob It is written on the number of gears in the car. Combining the reverse gear, this car has six gears. (image Fig.3)
Neutral Gear
Before you start the car you have to make sure that the car’s gear is not engaged. How do you know now? You press the clutch and bring the gear to the middle position. This is the neutral position. (image Fig.4)
Make Car Neutral
This stick will work in three positions on the left side during the first and second gear. First gear in the first position and neutral gear in the second position and second gear in the third position. Remember that the vehicle should always be neutral.
If the steering wheel of the vehicle is locked before starting, you have to put the key in the switch and click the steering wheel slightly to the right side and rotate the key then the steering lock will open then you check the vehicle before starting the vehicle and Make sure the vehicle is in the neutral position and then you will hit the self.
To drive the car you will first press the clutch completely then fully apply the first gear then press the brake with the right foot and then you press the brake button and turn the handbrake downwards, the handbrake will be released. (image Fig.5)
We apply the handbrake so that if the vehicle is parked on a slope it will not move back and forth. Now you have to gently press the accelerator and try the speedometer RPM Take the at least 1500 (image Fig.6)
If you are a complete Beginner, it will be difficult for you to keep up to fifteen hundred continuously. If it is between two thousand then slowly start releasing the clutch. The car will catch its rhythm and start moving. As soon as the car starts moving, release the clutch completely.
To stop this, press the clutch again and slowly apply the brakes, then the car will stop in its place. Now you have to neutralize the gear again. After neutralizing you can release the clutch and before releasing the brakes you have to press the handbrake and after applying the handbrake you can release both clutch and brake pedals. ۔
Now let me tell you about the second gear. I will tell you when you put on the first gear and after a little movement of the car, press the clutch with the left foot in the same way and press the brake with the right foot and take the car in first gear, similarly take the RPM to fifteen hundred, then slowly press the clutch and the car will start moving.
Now you will see that the car will feel heavy and from its sound, you will feel that the car is trying to go into second gear. Now you press the full clutch and apply the second gear and release the clutch.
Will give In the same way that you will increase the speed and the sound of the car will tell you that the car now needs third gear. Now apply the third gear and the car should go at a speed of 40km/h – 50km/h now and you can apply the fourth gear in the same way.
While learning manual car driving Now in the same way if you have to slow down the car then first you have to slow down the car by reducing the race and then by pressing the clutch you will shift the car from third to second gear. if you want to learn manual car driving then you should also learn about manual transmission.
MANUAL TRANSMISSION
I will now tell you about the manual transmission that the manual transmission is generally of two types
1. Sliding Match
2 Constant Match
manual transmission works on the formula of simple gear ratio in three ways The shafts are the input shaft, the output shaft and the countershaft. The power of the engine enters the transmission through the input shaft and this power is transferred to the countershaft through gears.
The parts commonly used in manual transmission These include the input shaft, output shaft, countershaft, synchronizers, idler gear, selector fork, and shift rod etc.
There are a few things to keep in mind when driving a manual transmission. The release is bearing. It keeps the clutch under pressure.
By pressing the pressure plate through the diaphragm spring, the action of the vetier is much greater. It will not happen, so whenever you stop the car at a signal, etc., or stop the car at another place in the same way, neutralize the car and release the clutch.
Secondly, when the car is moving normally, your foot should not be on the clutch pedal.
engagement in the clutch. be friction and the clutch will not engage and disengage properly which will cause the clutch to have to be replaced with manual transmission frequently because when you do this there is transmission three ways inside these shafts are working.
This gear lever is attache to the output shaft when you place your hand on this gear lever, there is pressure on the rotating shaft There will be friction between the fork and the shaft so don’t use the lever for hand rest.
You should never use clutch to hold the vehicle in mountainous areas as the speed of the vehicle’s engine clutch disc varies in this process.
Repeatedly adjusting by pressing the clutch and accelerator causes the corners of the clutch disc to rust, causing it to deteriorate and shorten its life.
If the engine RPM is not high then you can Don’t give the car too much race as if you are driving at 40 speed in fifth gear then you should not do this because you are wasting engine power which will waste more car petrol in waste because you Gears can be up or down as needed, taking less power than most.
So Readers in today’s article covers how to operate a manual transmission and learn manual car driving. If you are also new to driving then you must have learned a lot from this Article.
If you still feel any shortcomings and you want to learn live driving from the best and most professional instructors in Lahore then contact the number given below or click here to know the Fee structure.
Call for Learn Driving From Professional instructor:- +923006974722
Thanks!